Actuonix

L12-I Micro Linear Actuator with Internal Controller

£125.55

Qty

The L12 are our standard line of Micro Linear Actuator. They are built to last, constructed using an anodized aluminum shaft, all-metal gearbox, stainless steel screw and bearings.

The L12-I series has an embedded internal position controller that will allow you to send position commands which the actuator will follow. It can accept voltage, current or RC signal inputs. This actuator does NOT require the LAC board to run. Lower gear ratios have higher speed but less force. Higher gear ratios have higher force but are slower. All our actuators come with a hardware kit for mounting.

The L12-I line features 18 models including:

  • Optional stroke lengths of 30mm, 50mm or 100mm

  • 3 gearing options for maximum speeds between 6.5mm/s and 25mm/s and maximum forces between 22N (5lbs) and 80N (18lbs).

  • Available as a 6V or 12v model

 

 
 

Featured Products