Paritech

ASH 31 Kit 1:3

Starting from £2,928.00

The kit includes:

  • all GRP parts, ready for installation
  • colour stability of all GRP parts due to UV-resistant varnish RAL 9003 (white) - no yellowing any more (clean varnish only with polish, do not use acetone or spirit)
  • GRP canopy and fitting components, GRP cabin frame and mechanics with gas pressure damper
  • GRP cockpit, seat pan, two side parts and backrest
  • small articulated parts
  • wing connector
  • customs tariff number 95030075

The kit does not include:

  • RC and drive components
  • landing gear

Construction / prefabrication

wing:

  • elevator, wing, winglet already installed
  • high-strength two-part full GRP and CRP wing with three flaps and winglet (per side)
  • gap-free linkage with GRP sealing lip and eye bolts 4 mm (rudder horns)
  • thread for eye bolts (rudder horns) incorporated in flaps
  • wing locking (monobloc) installed
  • spoilers installed
  • 20 mm hardened round steel shaft as wing connector

fuselage:

  • fuselage reinforcement with glass unidirectional tape in entire canopy area and CRP unidirectional tape in fuselage tube area
  • closing frame with servo holder
  • bowden cable for rudder linkage pasted
  • back of fuselage varnished - invisible seam

accessoires:

  • set of small parts (eye bolts, clevis, 3 mm threaded rod, servo and spoiler covers)

Packaging size

  • inner wing 2300 mm
  • fuselage 2350 mm

Available at additional cost:

  • installation of canopy:
    • folding mechanism installed with gas pressure damper
    • canopy pasted and varnished
    • wind indicator pasted
    • canopy protection
  • installation of landing gear:
    • exclusive landing gear by Paritech, modified with swing rubber, gas pressure damper, base plate and servo holder, completely installed in fuselage with landing gear doors
    • tail wheel installed
  • rudder, covers of spoiler and servo installed
  • set of protective bags made of Cordura material:
    • dirt-repellent Cordura; lined with fleece inside to avoid scratches
    • high-quality zippers and carrying straps
    • set consisting of fuselage, elevator and wing connector, inner wing, outer wing and winglets
    • colour scheme: blue/gray with white Paritech print

Span: 7000mm

Hull Length: 2350mm

Take Off Weight: from 15kg

Area: 160 square decimetre

Profile: MH 32 / inside 14%, from 1000 mm to root 11%

Drive: AFT Schambeck, Jet CAT turbine, Jet Flex folding impeller Moses Modellbau

Scale: 1:3

 
 

Featured Products