Paritech

DG 1000 Kit 8,88 m 1:2,25

Starting from £4,820.00

The kit includes:

  • all GRP parts, ready for installation
  • colour stability of all GRP parts due to UV-resistant varnish RAL 9003 (white) - no yellowing any more (clean varnish only with polish, do not use acetone or spirit)
  • two GRP canopies and fitting components, two GRP cabin frames
  • small articulated parts
  • wing connector
  • customs tariff number 95030075

The kit does not include:

  • RC and drive components
  • landing gear
  • GRP cockpit

Construction / prefabrication

wing:

  • elevator and wing already installed
  • high-strength two-part full GRP and CRP wing with two flaps (without domed flap) or wing with three flaps (with domed flap) (per side)
  • gap-free linkage with GRP sealing lip and eye bolts 4 mm (rudder horns)
  • thread for eye bolts (rudder horns) incorporated in flaps
  • wing locking with bolting installed
  • spoilers installed
  • 30 mm aluminium carbon shaft or steel shaft as wing connector

fuselage:

  • divided fuselage made of vacuum sandwich material
  • fuselage reinforcement with CRP unidirectional tape in entire canopy area and fuselage tube area
  • closing frame installed with servo holders
  • servo holder for rudder linkage pasted in tail part
  • back of fuselage varnished - invisible seam

accessoires:

  • set of small parts (eye bolts, clevis, 3 mm threaded rod, servo and spoiler covers)

Packaging size

  • inner wing 2940 mm
  • fuselage 2230 mm and tail part 1570 mm

Available at additional cost:

  • installation of canopy:
    • folding mechanism and locking installed (2x)
    • canopy pasted and varnished (2x)
    • cabin windows installed (2x)
    • wind indicator pasted (2x)
    • canopy protection
  • installation of landing gear:
    • exclusive landing gear by Paritech, modified with swing rubber, gas pressure damper, base plate and servo holder, completely installed in fuselage with landing gear doors
    • tail wheel installed
  • rudder, covers of spoiler and servo installed
  • set of protective bags made of Cordura material:
    • dirt-repellent Cordura; lined with fleece inside to avoid scratches
    • high-quality zippers and carrying straps
    • set consisting of fuselage, tail part, elevator and wing connector, two inner wings, two outer wings
    • colour scheme: blue/gray with white Paritech print

Hull Length: 3800mm

Span: 8000/8800mm

Take Off Weight: from 24kg

Area: 312/327 square decimetre

Profile: HQ 3 / 13%

Drive: AFT Schambeck, FES power unit Hacker, Jet CAT turbine, Jet Flex folding impeller Moses Modellbau

Scale: 1:2,25

 
 

Featured Products