Paritech

SZD-54 Perkoz Kit 1:3

Starting from £2,693.00

The kit includes:

  • all GRP parts, ready for installation
  • colour stability of all GRP parts due to UV-resistant varnish RAL 9003 (white) - no yellowing any more (clean varnish only with polish, do not use acetone or spirit)
  • GRP canopy and fitting components, GRP cabin frame
  • small articulated parts
  • wing connector
  • customs tariff number 95030075

The kit does not include:

  • RC and drive components
  • landing gear
  • GRP cockpit

Construction / prefabrication

wing:

  • elevator, wing, winglet already installed
  • high-stength one-part full GRP and CRP wing with one flap (per side) with 5830 mm or two-part full GRP and CRP wing with two flaps (per side) with 6670 mm (incl. attachable wing and winglets)
  • gap-free linkage with GRP sealing lip and eye bolts 4 mm (rudder horns)
  • thread for eye bolts (rudder horns) incorporated in flaps
  • wing locking with bolting installed
  • spoilers (Schambeck) installed
  • 30 mm aluminium tube (Strongal) with glass bar

fuselage:

  • fuselage reinforcement with glass unidirectional tape in entire canopy area and CRP unidirectional tape in fuselage tube area
  • closing frame installed
  • back of fuselage varnished - invisible seam

accessoires:

  • set of small parts (eye bolts, clevis, 3 mm threaded rod, servo and spoiler covers)

Packaging size

  • wing 2830 mm
  • fuselage 2750 mm

Available at additional cost:

  • installation of canopy:
    • folding mechanism and locking mechanism installed
    • canopy and canopy handle pasted and varnished
    • rear window pasted
    • wind indicator pasted
    • canopy protection
  • installation of landing gear:
    • main wheel with splash guard by Paritech, axis and landing gear leg installed
    • front wheel with splash guard by Paritech and rear wheel installed
  • GRP cockpit (set of six parts)
  • rudder, covers of spoiler and servo installed
  • tow release installed
  • set of protective bags made of Cordura material (5830 mm or 6670 mm):
    • dirt-repellent Cordura; lined with fleece inside to avoid scratches
    • high-quality zippers and carrying straps
    • set consisting of fuselage, elevator and wing connector, inner wing, outer wing and winglets
    • colour scheme: blue/gray with white Paritech print

Span: 5830mm/6670mm

Hull Length: 2750mm

Take Off Weight: from 16,5kg

Scale: 1:3

Area: 5,83m

 
 

Featured Products