Jeti

MGPS EX 4MB

MGPS EX 4MB

£111.31

Qty

Exact information about the altitude and distance of a model in space are extremely important guidance elements for the pilot who is remote controlling the model. Thanks to the GPS satellite positioning system the MGPS sensor defines the exact model position and calculates speed, altitude and distance from the point of origin, furthermore the course, azimuth and the total covered distance.

In order to be able to record the measured data the MGPS sensor is equipped with a memory for approximately 9 hours of uninterrupted data recording with a numerosity of one record per second (4 MB MGPS version). For a simple analysis of measured data the sensor keeps information of minima and maxima which can be browsed with the aid of the JETIBOX. A more detailed analysis of measured data can be achieved by copying data from the sensor to a PC and map depicted trajectories or carry out other analysis modes. With the aid of the wireless DUPLEX system actual information of the MGPS sensor can be transmitted and depicted in real time by the JETIBOX terminal or DC/DS transmitters.

Tel: 07947523270

266 SWINNOW LANE LEEDS LS13 4HP UK

This Version of the Mflow now allows easy reset of the unit from the transmitter. Therefore measurement of the fuel used can begin right after you have removed your taxi tank

Our Price

£78.99

 Please allow a few seconds for the shopping cart to be updated

NEW VERSION!

M-Bar sensor

Our Price £62.55

 

 Please allow a few seconds for the shopping cart to be updated

RC Switch

NEXT PAGE

NEXT PAGE

Weight [g] 6
Dimensions [mm] 19 x 14 x 4
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 10

More info and manuals can be found HERE

Weight [g] 40
Dimensions [mm] 77 x 41 x 30
Operational temperature [°C] -20 ... 85
Supply Voltage [V] 5 ... 8.4
Average Current [mA] 20 
Measurement range 20-800 ml/min
Measurement accuracy ±2%
Tubing connection 2x Festo Ø4mm

More info and manuals can be found HERE

Our Price

£173.11

MFlow2 Turbine 800 EX

The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Turbine is a variant designed for the models powered by a jet engine, the MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

Main features •The sensor is compatible with Duplex EX system.
•EX telemetry values: actual flow and the amount of the fuel in the tank.
•User adjustable parameters, such as tank capacity, depleted fuel alarm, etc.
•Firmware updates.
MFlow consists of the flow sensor and the base. The sensor is connected to the base via a cable with a lock connector. The other cable labeled as „Ext“ is used for the DUPLEX system or the JETIBOX. The flow sensor is fitted with these endings according to the type:
MFlow T: 2x FESTO for tubes with the external diameter of 4mm

Weight [g] 40
Dimensions [mm] 72 x 41 x 30
Operational temperature [°C] -20 ... 85
Supply Voltage [V] 5 ... 8.4
Average Current [mA] 20
Measurement range 20-800 ml/min
Measurement accuracy ±2%
More info and manuals can be found HERE

MFlow G EX

The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

Main features •The sensor is compatible with Duplex EX system.
•EX telemetry values: actual flow and the amount of the fuel in the tank.
•User adjustable parameters, such as tank capacity, depleted fuel alarm, etc.
•Firmware updates.
MFlow consists of the flow sensor and the base. The sensor is connected to the base via a cable with a lock connector. The other cable labeled as „Ext“ is used for the DUPLEX system or the JETIBOX. The flow sensor is fitted with these endings according to the type: MFlow G: 2x barbed fittings for tubes with the internal diameter of 2 mm a 2x barbed fittings for tubes with the internal diameter of 3 mm

Our Price

£173.11

Weight [g] 4
Dimensions [mm] 36 x 20 x 5
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,2 - 8,4
Average Current [mA] 8

More info and manuals can be found HERE

EXPANDER E4 EX

The EXPANDER E4 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 4 sensors to a DUPLEX receiver. The expander can be set in a way which enables the JETIBOX to show several measured values simultaneously.

Our Price

£33.00

Weight [g] 11
Dimensions [mm] 38 x 12 x 6,5
Sustained current [A] 3
Operational temperature [°C] -20 ... 85 Recommended input voltage [V] 5 .. 8,4
Input voltage max. [V] 16
Peak current (max 5s) [A] 12

More info and manuals can be found HERE

EnLink 2RS

EnLink 2RS is a device for increasing safety and reliability of radio controlled models to the highest level. Parallel connection of systems that are detached maximally leads to the significant increase in reliability. EnLink2RS is constructed especially for installing to systems with parallel sorting of two receivers in the model.

Our Price

£36.27

Weight [g] 24
Dimensions [mm] 50 x 30 x 13
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 3,5 - 8,4
Average Current [mA] 40
Memory [MB] 4

More info and manuals can be found HERE

 

Featured Products