Xicoy X 132 Light / Pro Turbojet

£2,026.00

Qty

X 132  Specifications  

Please check for stock prior to ordering

Now available as Light or Pro version. Pro Version:

The new PRO hub comes with a custom box, 8 status LEDS, more power capability and interesting new features.  It has an internal memory that stores up to 2,5 hours of run time, with many more parameters than before that allow detailed analysis.  This data can be downloaded by customer using an USB-C port included in the hub.  Another interesting feature is that it includes the telemetry adapter, no need to purchase and install an external device. 

Price includes subsidised UK Shipping

 

Towards the end of the 1990's, Wren developed and set a new standard of small engine known as the MW54. This legendary engine gave a power output of 54N, with a can size of 90mm. It was smaller than the standard at the time, the engines derived from the KJ66 design with can sizes of around 110mm.

Over time, the power increased, and many manufacturers developed engines of this 90mm can size, up to a power of 100N.

Our new engine goes one step further again, achieving 120N of thrust with low Specific Fuel Consumption. 

The X132 boasts new electronics which keeps up with typical to Xicoy standards, simple lightweight installation and of course it incorporates our FlexThrust Technology giving you anywhere from 60N to 132N at the press of a button. The X132 is perfect for all those popular models that need engines in the range of 60N to 132N. Plenty of kits available to choose from that are of an affordable and practical size.  Having an engine that can be used on all of them, the investment on a X132 is a perfect, long term decision!!

Specifications

 

Specifications

 

 

Thrust:

Continuously adjustable from 60 to 132N (29.7 Lbf)

 

Size:

90,2mm diameter, 198mm long

 

Weight:

950g (2,1lb) engine, 1.045g (2,3lb) total installed weight except battery

 

Rpm Range:

40,000 ... 150.000 RPM

 

Idle Thrust:

4.9N (1.1Lbf)

 

Fuel:

Kerosene or Diesel + 4% oil

 

Fuel consumption:

350g/minute at 120N. (435ml/min)

 

Starter motor:

High speed brush-less

 

Fuel pump:

Digitally controlled brush-less pump

 

Telemetry:

Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and  Bluetooth Android and IOS (optional modules)

 

Service interval:

25 hours 

 

Recommended battery:

2s Lipo/2200mAh  (3s Life compatible).  Battery not included

 

Other:

Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

 

 
 

Featured Products